NKPF-400D Automatic High Speed Injectable Powder
Filling With Rubber
Stoppering Machine
Basic Machine
 |
Imported Gear Motor for Main drive,
Unscrambler and scrambler. |
|
|
A.C. Frequency drive for Main drive,
Unscrambler and Scrambler. |
|
|
Pre and Post Gasing unit for Nitrogen or
Carbon Dioxide flushing. |
|
|
Pure air filter for Air and Vacuum. |
|
|
"No Vial, No Filling" System. |
|
|
"No Stopper in Chute, Machine Stop System" |
|
|
Vacuum pump. |
|
|
Acrylic Cabinet with Imported Aluminum
Structure for Machine,
Unscrambler and Scrambler. |
Machine Specifications
| Model No. |
: |
NKPF - 400D |
| Direction |
: |
Left To Right |
| Production Rate. |
: |
Up to 240 fills/Min for Single
Dose.
Up to 240 fills/Min for Double Dose.
Up to 80 fills/Min for Triple Dose.
Up to 120 fills/Min for Four Dose. |
| Fill Capacity |
: |
50 mg to 1.5 grms. Single Dose
(with Change Parts) 1.5 grms. to 6 grms. Double, Triple and Four Dose. Fill
range depending upon vial opening and bulk density of powder. |
| Accuracy |
: |
± 1% depending upon
consistency and the uniformity of bulk density of injectable powder under
controlled level of Humidity (i.e. 25%) |
| Electrical Supply
|
: |
1.00 HP For Main Drive.
0.50 HP For Unscrambler.
0.50 HP for Scrambler. |
| Power Requirement |
: |
440 Volts, 3 Phase (4 wire
System) 50 Hz. |
| Height of Conveyor |
: |
Adjustable from 900 to 950 mm |
| Dimensions |
: |
3759 MM (L) x 1242 MM (W)
x
1885 MM (H) |
| Net Wight |
: |
1400 KGS. (Approx.) |
| Gross Weight |
: |
1850 KGS. (Approx.) |
Input Specifications
| Vial Diameter |
: |
25 mm TO 38 mm
MAX. |
| Height |
: |
75 mm MAXIMUM. |
| Rubber Stopper |
: |
20 mm DIAMETER |
Note: (1) Right of technical improvements &
modifications reserved
(2) All
illustrations and dimensions are shown for information only
Previous |
Deutsch
Français
Español
Русско
