|
NKPF-250D Automatic High Speed Injectable Powder Filling with Rubber
Stoppering Machine
Basic Machine
 |
Imported Gear Motor for Main
drive, Unscrambler and scrambler.
|
|
|
A.C. Frequency drive for Main
drive, Unscrambler and Scrambler.
|
|
|
Pre and Post Gasing unit for
Nitrogen or Carbon Dioxide flushing.
|
|
|
Pure air filter for Air and
Vacuum.
|
|
|
"No Vial, No Filling" System.
|
|
|
"No Stopper In Chute, Machine
Stop System"
|
|
|
Vacuum pump.
|
|
|
Acrylic Cabinet with Imported
Aluminum Structure for Machine, Unscrambler and Scrambler.
|
Machine Specifications
| Model No. |
: |
NKPF-250D |
| Direction |
: |
Left To Right |
| Production Rate. |
: |
Up to 240 fills / Min for
Single Dose.
Up to 120 fills / Min for
Double Dose.
Up to 80 fills / Min for
Triple Dose.
Up to 60 fills / Min for
Four Dose. |
| Fill Capacity |
: |
50 mg 1.5 grms. Single Dose
(with Change Parts) 1.5 grms to 6 grms. Double, Triple and Four Dose. Fill
range depending upon vial opening and bulk density of powder. |
| Accuracy |
: |
± 1% depending upon
consistency and the uniformity of bulk density of injectable powder Under
controlled level of Humidity (i.e. 25%) |
| Electrical Supply |
: |
1.00 HP For Main Drive
0.50 HP For Unscrambler
0.50 HP For Scrambler |
| Power Requirement |
: |
440 Volts, 3 Phase (4 wire
System) 50 Hz. |
| Height of Conveyor |
: |
Adjustable from 800 to 850 mm |
| Diamensions |
: |
3759 mm (L) x 1242 mm (W)
x
1885 mm (H) |
| Net Wight |
: |
1050 KGS. (Approx.) |
| Gross Weight |
: |
1550 KGS. (Approx.) |
Input Specifications
| Vial Diameter |
: |
25 mm to 38 mm MAX. |
| Height |
: |
75 mm MAXIMUM. |
| Rubber Stopper |
: |
20 mm DIAMETER. |
Note: (1) Right of technical improvements &
modifications reserved
(2) All
illustrations and dimensions are shown for information only
Previous |
Deutsch
Français
Español
Русско
