NKAC - 120 Automatic Air Jet Cleaning
Machine Inbuilt
Unscrambler of 30" Dia.
 |
|
NKAC - 120 Automatic Air Jet Cleaning Machine
inbuilt Unscrambler of 30" Dia. is a compact unit used for cleaning of Dry Syrup
bottles before filling. |
Click on the image to zoom
|
Operation
This machine works on a
principle of back pressure of Bottle which will be fed by the unscrambler to
reach separator assembly, which transfer the Bottle on conveyor belt and pushes
bottle to the cleaning section one after another. Machine consist of two
inverters and one cleaning section. Bottle will be pushed by rotating separator
towards the infeed inverter, which makes the Bottle in the wrong direction and
push it to cleaning section through back pressure of other Bottle. Cleaning
section is equipped with continuous vacuum system. Bottle reaches to the
cleaning section, a pair of nozzle starts to flush the air inside the neck of
the Bottle and simultaneously vacuum will suck the particle, disturbed by the
air. Then Bottle passes to another inverter, where changes the direction to the
right direction, further Bottle moves either to the filling machine.
Salient Futures
 |
Totally made of S.S. Pipe
structure with adjustable screws for height adjustment.
|
|
|
Total cGMP model.
|
|
|
Require less installation
space.
|
|
|
No timing setting is required
to be done.
|
|
|
Less change over time for
change parts.
|
|
|
High capacity blower suck the
minute particle from bottle, ensure good cleaning of bottles.
|
|
|
A Special clutch device is
incorporated on the Star wheel system for Stoppage of Machine in the event,
bottle is over turned or over diameter.
|
|
|
Single motor synchronizes
conveyor, star wheels and sealing head. Speed can be varied by the % speed pot on
operating panel.
|
Basic Machine
|
|
Imported Gear Motor for Main
drive.
|
|
|
A.C. Frequency drive for Main
drive.
|
|
|
Acrylic Cabinet with Aluminum
Structure for Machine.
|
|
|
Infeed Turn Table.
|
Machine Specification
| Model No. |
: |
NKAC - 120 |
| Direction |
: |
Left To Right |
| Production Rate. |
: |
Up to 60 to 120 Bottles / Min |
| Electrical Supply
|
: |
1.00 HP For Main Drive
0.5 HP For Blower. |
| Power Requirement |
: |
440 Volts, 3 Phase (4 wire
System) 50 Hz. |
| Height of Conveyor |
: |
Adjustable from 800 to 850 mm |
| Dimensions |
: |
1815 MM (L) x 597 MM (W)
x
1298 MM (H) |
| Net Wight |
: |
300 KGS. (Approx.) |
| Gross Weight |
: |
450 KGS. (Approx.) |
Input Specifications
| Bottle Diameter |
: |
25 mm To 55 mm
MAXIMUM. |
| Height |
: |
45 mm To 110
mm MAXIMUM. |
Note: (1) Right of technical improvements &
modifications reserved
(2) All
illustrations and dimensions are shown for information only
|
Deutsch
Français
Español
Русско
