Injectable Dry Powder Filling with puck and place rubber stoppering, vial washing machine, sticker labelling machine, labeling machine

MODEL ATPF-125 - AUTOMATIC INJECTABLE DRY POWDER FILLING WITH PICK & PLACE TYPE RUBBER STOPPERING MACHINE

MACHINE SPECIFICATION

Model No.	;	ATPF - 125
Direction	:	Left to Right
Production Rate	:	Up to 120 fills / Min for Single Dose Up to 60 fills / Min for Double Dose Up to 40 fills / Min for Triple Dose Up to 30 fills / Min for Four Dose
Fill Capacity	:	50 Mg to 1.5 grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of powder
Accuracy	:	± 1% depending upon consistency and the uniformity of bulk density of injectable powder Under controlled level of Humidity (i.e.25%)
Electrical Supply	:	1.00 HP for Main Drive 0.50 HP for Unscrambler 0.50 HP for Scrambler
Power Requirement	:	440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor	:	Adjustable from 800 to 850 MM A
Dimensions	:	3028 MM (L) X 1093 MM (W) X 1885 MM (H)
Net Weight	:	800 Kgs. (Approx.)
Gross Weight	:	1200 Kgs. (Approx.)

Note: (1) Right of technical improvements & modifications reserved
(2) All illustrations and dimensions are shown for information only

* we can supply the machines with CE / UL markings at customer's request