|
OPERATION
First of all
from the tray the ampoules are loaded to the infeed conveyor . The infeed
conveyor belt is a endless pvc belt which carries the ampoules towards the
labelling section with the help of feed worm. The infeed worm picks the ampoules
and transfers the same by keeping pre determined space between two ampoules to
the rotating starwheel. The starwheel carries the ampoules and moves towards the
label applicator. A sensor for sensing ampoule is fitted before the label
applicator which senses the ampoules and in turn, servo motor allows the label
applicator to release one label which gets sticked on the ampoule. One label
sensor is provided in the machine which senses the gap between two labels. This
ensures that only one label is applied to the amopoule at a time. Once the label
gets sticked to the ampoule it passes through the pressing belt where the labels
gets properly pressed without giving any crease. After this the ampoules are
guided to the out feed tray where the ampoules are collected and taken for the
next operation.
SALIENT FEATURES
 |
Complete cGMP model
|
|
|
Three output speed model available
of 120 ampoules/min,
|
|
|
240 ampoules/min & 400
ampoules/min.
|
|
|
S.S. 304 construction
|
|
|
Accurate label placement
|
|
|
Servo based system (Depending on
Speed)
|
|
|
PLC system
|
|
|
Rotating control panel for the
convenience of the operator.
|
|
|
Easy change over.
|
|
|
Easy for cleaning & maintenance.
|
BASIC MACHINE
|
|
Imported gear box with motor for machine
|
|
|
A.C. Frequency drive for machine
|
|
|
Servo motor
|
|
|
PLC system
|
|
|
Imported sensor for container & label.
|
|
|
Inbuilt speed indicator & counter
|
MACHINE SPECIFICATIONS
|
Model No. |
: |
ATAML-400 |
|
Production rate
|
: |
Up to 400 Ampoules / Min |
|
Electrical supply
|
: |
2 HP
|
|
Power requirement |
: |
220 Volts, Single, Phase 50Hz |
|
Height of Conveyor |
: |
Adjustable from 800 to 850 MM
|
|
Dimensions
|
: |
1500MM(L) X 1840 MM (W) X 1350 MM (H) |
|
Net weight |
: |
450 KGS. (Approx.) |
|
Gross weight
|
: |
600 KGS. (Approx.)
|
|
INPUT SPECIFICATIONS |
|
|
|
Label height |
: |
10 mm to 90 mm |
|
Label length |
: |
12 mm to 90 mm |
|
Gap between two labels |
: |
Min. 3 mm |
|
Label roll diameter |
: |
300 mm max. |
|
Label roll core diameter |
: |
75 mm to 76 mm |
|
Container diameter |
: |
5
mm to 38 mm |
Note: (1) Right of technical improvements &
modifications reserved
(2) All
illustrations and dimensions are shown for information only
|
Deutsch
Français
Español
Русско
