AF-D-100 Automatic
Double Head Auger Type Powder Filling Machine
 |
|
AF-D-100 Automatic Double Head
Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling
Dry Syrup Powder in bottles. |
Click on the image to zoom
 |
Operation
The incoming dry bottle
(sterilized and siliconised) are fed through the infeed Turn Table with suitably
guided on the moving delrin flat conveyor belt at the required speed for
feeding. There are two separate filling head mounted on machine top plate in the
same line. When bottle reaches to the first filling station, it will be held by
the pneumatic bottle holder. Immediately it will be sensed by the bottle sensor
as soon as it gets signals from sensor from magnetic clutch starts to rotate
which is mounted on auger shaft. It will fill the desired amount of powder to
the bottle through auger, where rotation time is previously saved in PLC
control. After filling of first bottle pneumatic piston goes back and release
the first bottle to move on conveyor, By the same time second bottle also moves
along with the first bottle in empty condition. In second filling head same
operation will be performed but this time second bottle get filled and first
bottle moves further for next operation. The main advantage of this machine is
Pneumatic bottle holding system is directly connected with Auger rotation, so
till bottle get filled with powder as per set value pneumatic system will not
going to release the bottle.
Salient Features
 |
Total Compact cGMP model.
|
|
|
All parts and assemblies coming
in contact with powder are made of S.S.316
|
|
|
"NO BOTTLE, NO FILL" System
eliminates wastage of costly powder.
|
|
|
Conveyor driving is through
High quality imported Gear motor.
|
|
|
Machine speed can be adjusted
by A.C. Frequency drive, which is time saving.
|
|
|
Machine is provided with delrin
conveyor belt to avoid sticking of vial on conveyor.
|
|
|
Single track bottle movement,
reduces setting of supporting guide rails and semi skilled person can also
easily operate the machine.
|
|
|
Pneumatic bottle holding system
is connected with auger rotation, which eliminates chances of bottle transfer
before completion of filling operation.
|
|
|
Total PLC control for the
machine.
|
|
|
No change parts
are required for any change in bottle diameter from 30 to 120 ml.
|
Utilities (To be Provided by
Buyer)
| Pneumatic Air |
: |
Filtered, oil free, sterile
low pressure AIR at 6 kg/cm2 |
Basic Machine
|
|
Imported Gear Motor for
Conveyor drive.
|
|
|
A.C. Frequency drive for
Conveyor drive.
|
|
|
"No Bottle, No Filling" System.
|
|
|
PLC control for machine.
|
|
|
Pneumatic bottle holding
system.
|
Machine Specifications
| Model No. |
: |
AF-D-100 |
| Direction |
: |
Left To Right |
| Production Rate. |
: |
Up to 60 to 80 Bottles / Min. |
| Fill Capacity |
: |
10 grms to 50 grms. (with
different set of Auger and funnel) Fill range depending upon Bottle opening
and bulk density of powder. |
| Accuracy |
: |
± 2% depending upon
consistency and the Uniformity of bulk density of powder Under
controlled level of Humidity (i.e. 35%) |
| No. of Hads |
: |
Two |
| Electrical Supply
|
: |
2.00 HP For Main Drive
0.25 HP For Conveyor. |
| Power Requirement |
: |
440 Volts, 3 Phase (4 wire
System) 50 Hz. |
| Height of Conveyor |
: |
Adjustable from 850 to 900 MM |
| Dimensions |
: |
2200 MM (L) x 1102 MM (W)
x
1817 MM (H) |
| Net Wight |
: |
550 KGS. (Approx.) |
| Gross Weight |
: |
800 KGS. (Approx.) |
Input Specification
| Bottle Conveyor |
: |
25 mm To 70 mm MAX. |
| Height |
: |
55 mm To 110
mm. |
Note:
(1) Right of technical improvements &
modifications reserved
(2) All
illustrations and dimensions are shown for information only
|
Deutsch
Français
Español
Русско
